Extension of H steel beam brings strong earthquake resistant structure
Earthquake Resistant Reinforcement
Project Status
Major earthquake is expected in Kanto resion (Tokyo, Kanagawa, Saitama, Chiba), Tokai resion (Shizuoka, Aichi, Gifu, Mie) in the near future, and active project is now underway all over the country.
Reinforcing Method
Earthquake resistant reinforcement has begun to attract concern assuming a major earthquake.
In one of methods of earthquake resistant reinforcement work, H steels are installed on pole or beam of existing buildings. This bring strong earthquake resistance. Many schools and public facilities have adoptd this method.
Problem
By the method mentioned above, edges of H steel bar may remain naked in some cases. Reinforcement H steel may be installed indoors, and it might be cause of serious injuiry. H steel edge is very hard and sharp, so high-level safety measures are required at schools.
![]() |
![]() |
Shock Absorber the Most Suitable for Safety Measures
H Steel Pole Application Type
"H STEEL SAFETY GUARD" installed by adhesion-fix to H Steel edge.
Wide size lineup. It fits for various H steel.
![]() |
![]() |
All-Purpose Application Type
"NAMI★SPO" with double sided tape installable by only sticking to pole edge.
Applicable for joint bolt part of H steel where "H STEEL SAFETY GUARD" hard to install because wavy sheet body fits uneven surface.
![]() |
![]() |
![]() |
H Steel Edge Protector at parkings and earthquake resistant reinforcement etc. Soft & flexible body absorbs shock well. |
![]() |
All-Purpose Shock Absorber with double sided tape. Very suitable for corner protectors of poles, H steel and so on. |
Related News
![]() |
More and more sectors have adopted "H STEEL SAFETY GUARD". Many schools and public facilities have adopted "H STEEL SAFETY GUARD" for protection of H steel bars extended for earthquake resistant reinforcement. |
![]() |
"H STEEL SAFETY GUARD" is necessary for earthquake resistant reinforcement. At earthquake resistant reinforcement, H Steel Edge Protector is necessary because H steel's naked edge is very sharp and it might cause serious injury. |














