Abrasion resistant hose for suction and delivery
Proper Application
Sand suction, sand collection, delivery with great abrasion
For both delivery and suction
Characteristics
Abrasion Resistance
Inner rubber has abrasion resistance with highest quality.
Prevention from Early Abrasion of Metal Fitting
Metal fitting part is lined with the same qualitative rubber as inner rubber layer.
It has never early abrasion.
Structure

The picture above is very simple.
Please feel free to contact us for more information.
Standard Specification
Working Pressure: 0.49MPa, Max. Manufacturable Length: 10m
| N.D. | in. | I.D. mm |
O.D. mm |
Cord P-CP |
Wire | Weight | |
Hose kg/m |
Fitting kg/set |
||||||
| 40 | 1-1/2 | 38.1 | 58 | 1-2 | 1 | 2.5 | 2.8 |
| 50 | 2 | 50.8 | 73 | 3.6 | 3.8 | ||
| 65 | 2-1/2 | 63.5 | 86 | 4.3 | 5.2 | ||
| 75 | 3 | 76.2 | 99 | 4.9 | 6.8 | ||
| 100 | 4 | 101.6 | 127 | 7.6 | 9.0 | ||
| 125 | 5 | 127.0 | 155 | 10.1 | 12.2 | ||
| 150 | 6 | 152.4 | 186 | 13.9 | 18.6 | ||
| 200 | 8 | 203.2 | 243 | 20.8 | 26.2 | ||
| 250 | 10 | 254.0 | 297 | 31.6 | 39.4 | ||
Weight of metal fitting is based on JIS-5K flange.
OD and weight data is not garanteed, and may be changed due to working pressure and service condition.
Working Pressure: 0.98MPa, Max. Length: 10m
| N.D. | in. | I.D. mm |
O.D. mm |
Yarn P-CP |
Wire | Weight | |
Hose kg/m |
Fitting kg/set |
||||||
| 40 | 1-1/2 | 38.1 | 59 | 1-2 | 1 | 2.6 | 4.2 |
| 50 | 2 | 50.8 | 74 | 3.7 | 5.4 | ||
| 65 | 2-1/2 | 63.5 | 87 | 4.5 | 7.4 | ||
| 75 | 3 | 76.2 | 100 | 5.4 | 7.8 | ||
| 100 | 4 | 101.6 | 129 | 8.2 | 10.4 |
||
| 125 | 5 | 127.0 | 157 | 10.8 | 15.0 | ||
| 150 | 6 | 152.4 | 187 | 15.1 | 22.2 | ||
| 200 | 8 | 203.2 | 244 | 1-4 | 24.4 | 28.4 | |
| 250 | 10 | 254.0 | 302 | 35.5 | 44.2 | ||
Weight of metal fitting is based on JIS-10K flange.
OD and weight data is not garanteed, and may be changed due to working pressure and service condition.





